

Attachment to the connection components using 2 clamping screws.
Item No :
CP 6501020Material :
Steel pipe, powder coatedOrder(MOQ) :
1 pc(s).Color :
RAL 7035ETIM 9 :
EC000882
Rittal CP 6501020 is the 1,000 mm steel support section in the CP 40 support arm range. It provides a longer straight section when an operator enclosure or control panel needs to be positioned farther from the mounting point. The section is powder-coated in RAL 7035.
CP 6501020 attaches to the selected connection components with two clamping screws. Rittal supplies one support section under this article number. Connection components must be selected separately for the complete support arm assembly.
| Article no. | CP 6501020 |
|---|---|
| Material | Steel, powder-coated |
| Colour | RAL 7035 |
| Length | 1,000 mm ( 39.4 ˝ ) |
| Diameter | 48.3 mm ( 1.9 ˝ ) |
| Material thickness | 4 mm ( 0.16 ˝ ) |
| Supply includes | Support section |
| Packaging unit | 1 pc(s). |
| Net weight | 4.7 kg |
| Gross weight | 4.72 kg |
| PCF per pack (cradle-to-gate) | 16 kg CO2 eq (Category B; approximate, self-declared) |
| Customs tariff number | 73269098 |
| EAN | 4028177262881 |
| ETIM 9 | EC000882 |
| ECLASS 8.0 | 27400556 |
Choose CP 6501020 when the CP 40 layout calls for a 1,000 mm support section between the selected connection components. This length may be needed when a 500 mm section does not place the operator enclosure or control panel in the intended position. Check the mounting location, working position and clearance around the finished assembly before ordering.
A longer section changes the geometry of the support arm. Confirm the permissible load and the relevant connection components for the complete assembly using Rittal's technical documentation. The 1,000 mm section length is not the finished reach of the arm. If a shorter section is sufficient for the layout, CP 6501.000 is the 500 mm variant.
For a quotation, send us an enquiry with article number CP 6501020, the required quantity and delivery destination. If the section is for a new support arm assembly, include the enclosure or panel model and the connection component article numbers. A layout sketch is useful when the required connection components have not yet been identified.