Rittal SZ 2504500 Multi-Tooth Screws, M6 × 12 mm, Pack of 300

Rittal SZ 2504500 multi-tooth screws have an M6 thread and 12 mm thread length. They are used with compatible snap-on nuts, U-nuts, captive nuts and speed nuts for enclosure accessory assembly.

Each pack contains 300 screws. When ordering for an existing cabinet, identify the nut or mounting accessory article number and check that the screw length suits the connection.

Selection and Installation

• Match the nut: check the nut type, M6 thread and mounting accessory instructions. Use the enclosure and accessory article numbers to confirm the fastening arrangement.
• Check the connection thickness: allow sufficient thread engagement through the bracket, rail or panel while checking clearance behind the nut.
• Choose the correct tool: use a bit that fits the screw drive. Follow the relevant assembly instructions for the tightening torque.
• State the order quantity: specify whether the requirement is in individual screws or packs of 300.

FAQ

Q1: Which enclosure series can these screws be used with?
A: Select the screws by the mounting connection and compatible nut. Send the enclosure and accessory article numbers so the fastening arrangement can be checked.

Q2: Are nuts included in the pack?
A: The product is listed as a pack of 300 screws. Specify the required nuts separately in your enquiry.

Q3: What bit size and tightening torque should I use?
A: Check the screw drive and the assembly instructions for the connection. Include the mounting accessory article number when requesting installation information.

Q4: Can I substitute another M6 screw length?
A: Check the total connection thickness, thread engagement and clearance behind the nut first. Confirm that the alternative screw is permitted for the accessory being installed.