VX 8865000 Bayed Enclosure 800 x 1600 x 500 mm

VX 8865000 is a single-door VX25 bayed enclosure measuring 800 x 1600 x 500 mm. The sheet-steel enclosure includes a mounting plate, rear panel, roof plate and divided gland plates. Its 25 mm pitch pattern and two mounting levels support flexible installation of electrical components, control equipment and cable-management accessories.

The 1600 mm enclosure height is suited to applications that need a lower cabinet while retaining the modular VX25 frame and baying capability. With separately ordered side panels, it can be used as a standalone enclosure or combined with other compatible VX25 enclosures.

We support both single-unit and bulk procurement of VX 8865000, with genuine Rittal products available from stock for fast quotation and delivery.

VX 8865000 Technical Specifications

Scope of Supply

• Enclosure frame
• One front door, hinged on the right and reversible to the left
• Roof plate
• Rear panel
• Divided gland plates
• Mounting plate
• Two punched rails, 18 x 39 mm
• Lock with 3 mm double-bit insert

VX25 System Features

• 25 mm frame pattern: The symmetrical frame provides two mounting levels accessible from inside and outside for flexible interior installation.
• All-side baying: The enclosure can be combined with other VX25 enclosures using the appropriate baying components.
• Depth-adjustable mounting plate: The mounting plate can be positioned on a 25 mm pitch pattern.
• Door access: The standard opening angle is 130 degrees, and the hinge side can be changed from right to left. A 180-degree opening is possible with the appropriate hinge solution.
• Load capacity: The enclosure system is specified for a load capacity of up to 15,000 N when installed in accordance with the applicable instructions.
• Potential equalization: The rear panel, roof and gland plates are conductively connected to the frame and prepared for additional earthing straps.

Applications

VX 8865000 may be used as a floor-standing enclosure for machine controls, automation systems, manufacturing equipment and electrical distribution assemblies. It can operate as a standalone cabinet with side panels or as one section of a bayed enclosure suite.

Compatible VX25 Accessory Categories

Common accessory categories for VX 8865000 include:

• Screw-fastened side panels for 1600 mm high, 500 mm deep VX enclosures
• Internal baying brackets and blocks, plus external baying connectors
• Punched sections and rails for interior installation
• Cable-entry sections, cable-entry plates and cable-management components
• VX base/plinth corner pieces and trim panels
• Comfort handles, door accessories and 180-degree hinge solutions
• LED system lights, earthing components and transportation accessories

Accessory compatibility depends on enclosure dimensions, installation position and project configuration. Confirm the required article numbers before placing an order.

View All VX25 Accessories and System Components 

Approvals

Confirm the current certificate edition, language and project acceptance requirements before procurement. Documentation availability may vary by market and document type.

Downloads

FAQ

Q1: Is the 1600 mm enclosure height sufficient for my control system?

A: Compare the 699 x 1496 mm mounting plate with the total footprint of the components, wiring ducts and terminals. Also allow space for cable bends, heat separation and future maintenance. If the required layout exceeds this usable area, select a taller VX25 model rather than reducing the recommended installation clearances.

Q2: How can I check whether deep components will fit inside VX 8865000?

A: Measure the complete installed depth of the component, including terminals, connectors, cable-bending space and door-mounted equipment. The mounting plate is depth-adjustable on a 25 mm pitch pattern, but the final position must still provide safe wiring, airflow and service clearance.

Q3: What must be added before VX 8865000 can be used as a standalone enclosure?

A: Side panels are not included and must be ordered separately to close the open sides. Select panels for a 1600 mm high and 500 mm deep VX enclosure. Depending on the installation, the project may also require a base/plinth, cable-entry components, climate-control equipment, earthing accessories and transportation hardware.

Q4: How do I select compatible VX25 accessories for this model?

A: Match side-mounted components to the 1600 mm height and 500 mm depth. Front and rear base/plinth components must match the 800 mm enclosure width, while side trim panels must match the 500 mm depth. Verify the accessory article number, installation position and required quantity before purchase.

Q5: Will cable-entry or cooling cut-outs affect the IP55 protection rating?

A: They can. IP55 applies when the enclosure is correctly assembled with the required side panels. Use compatible cable-entry parts, climate-control equipment, seals and installation methods for every cut-out. Check the protection rating of the completed assembly after all modifications.

Q6: Can VX 8865000 be added to an existing VX25 enclosure line?

A: VX25 enclosures are bayable on all sides, but a 1600 mm high enclosure may not align with taller sections in an existing suite. Confirm enclosure height, depth arrangement, baying connectors, sealing, earthing continuity, base/plinth alignment and cable routing before finalizing the layout.

Q7: Can I purchase VX 8865000 together with the required accessories?

Q: Yes. We support both single-unit and bulk procurement, including model verification, compatible accessory matching, consolidated quotation, technical documentation and international delivery coordination. Confirm current stock and delivery time when requesting a quotation.