VX 8880000 Bayed Enclosure 800 x 1800 x 500 mm

VX 8880000 is a two-door VX25 bayed enclosure measuring 800 × 1800 × 500 mm. The sheet-steel enclosure includes a mounting plate, rear panel, roof plate and divided gland plates. Its 1800 mm height and 500 mm depth provide a comparatively compact floor-standing configuration for industrial control and automation installations where installation space is limited.

The VX25 modular frame supports flexible internal installation and side-by-side baying with compatible system components. We support single-unit and bulk procurement of VX 8880000, including model verification, accessory matching, technical documentation and international delivery coordination.

VX 8880000 Technical Specifications

Scope of Supply

• Enclosure frame
• Two front door, hinged on the right and reversible to the left
• Roof plate
• Rear panel
• Divided gland plates
• Mounting plate
• Two punched rails, 18 x 39 mm
• Lock with 3 mm double-bit insert

VX25 System Features

• 25 mm frame pattern: The symmetrical frame provides two mounting levels accessible from inside and outside for flexible interior installation.
• All-side baying: The enclosure can be combined with other VX25 enclosures using the appropriate baying components.
• Depth-adjustable mounting plate: The mounting plate can be positioned on a 25 mm pitch pattern.
• Door access: The standard opening angle is 130 degrees, and the hinge side can be changed from right to left. A 180-degree opening is possible with the appropriate hinge solution.
• Load capacity: The enclosure system is specified for a load capacity of up to 15,000 N when installed in accordance with the applicable instructions.
• Potential equalization: The rear panel, roof and gland plates are conductively connected to the frame and prepared for additional earthing straps.
• 8880000 Two-door configuration: The 800 mm wide enclosure uses two front doors, providing front access while reducing the individual door swing area compared with a single full-width door.

Applications

VX 8880000 is suitable for industrial control and automation installations that require a tall, deep floor-standing enclosure.

Typical applications include machine control systems, manufacturing equipment, electrical distribution assemblies and multi-enclosure automation systems.

Compatible VX25 Accessory Categories

Common accessory categories for VX 8825000 include:

• Screw-fastened side panels for 2200 mm high, 800 mm deep VX enclosures
• Internal baying brackets and blocks, plus external baying connectors
• Punched sections and rails for interior installation
• Cable-entry sections, cable-entry plates and cable-management components
• VX base/plinth corner pieces and trim panels
• Comfort handles, door accessories and hinge solutions
• LED system lights, earthing components and transportation accessories

Accessory compatibility depends on enclosure dimensions, installation position and project configuration. Confirm the required article numbers before placing an order.

View All VX25 Accessories and System Components 

Approvals

Confirm the current certificate edition, language and project acceptance requirements before procurement. Documentation availability may vary by market and document type.

Downloads

FAQ

Q1: Is VX 8880000 suitable for standalone installation?

A: VX 8880000 can be used as a standalone enclosure when the required side panels and other configuration-specific components are installed. Side panels are not included with the basic enclosure, so they should be selected according to the enclosure dimensions and required protection level.

Q2: What should I check before choosing the 500 mm depth?

A: Before selecting the 500 mm depth, check the installed depth of electrical components, mounting clearances, terminal locations and cable-bending radii. Additional space may also be required for rear wiring, cable ducts or climate-control equipment. If the internal layout requires more clearance, a deeper VX25 configuration may be more appropriate.

Q3: When is the two-door configuration useful?

A: The two-door design can be useful where front operating clearance is limited, because each door requires less swing space than a single full-width door. It can also provide more convenient access to different sections of the internal installation. Door arrangement should still be checked against the planned equipment layout and operating environment.

Q4: How do I know which accessories are compatible with VX 8880000?

A: Accessory compatibility should be checked by enclosure height, width, depth, mounting position and intended function rather than by the VX25 series name alone. For VX 8880000, confirm the required article numbers before ordering side panels, mounting components, cable-entry parts, base/plinth components or door accessories.