VX 8884000 Bayed Enclosure System 800×1800×400 mm

VX 8884000 is a single-door VX25 bayed enclosure measuring 800 × 1800 × 400 mm. The sheet-steel enclosure includes a mounting plate, rear panel, roof plate and divided gland plates. Its 400 mm depth provides a relatively shallow floor-standing configuration for industrial control and automation installations where installation depth is limited.

 

The VX25 modular frame supports flexible internal installation and side-by-side baying with compatible system components. We support single-unit and bulk procurement of VX 8884000, including model verification, accessory matching, consolidated quotations, technical documentation and international delivery coordination.

VX 8884000 Technical Specifications

Scope of Supply

• Enclosure frame
• One front door, hinged on the right and reversible to the left
• Roof plate
• Rear panel
• Divided gland plates
• Mounting plate
• Two punched rails, 18 x 39 mm
• Lock with 3 mm double-bit insert

VX25 System Features

• 25 mm frame pattern: The symmetrical frame provides two mounting levels accessible from inside and outside for flexible interior installation.
• All-side baying: The enclosure can be combined with other VX25 enclosures using the appropriate baying components.
• Depth-adjustable mounting plate: The mounting plate can be positioned on a 25 mm pitch pattern.
• Door access: The standard opening angle is 130 degrees, and the hinge side can be changed from right to left. A 180-degree opening is possible with the appropriate hinge solution.
• Load capacity: The enclosure system is specified for a load capacity of up to 15,000 N when installed in accordance with the applicable instructions.
• Potential equalization: The rear panel, roof and gland plates are conductively connected to the frame and prepared for additional earthing straps.

Applications

VX 8884000 may be used for machine controls, automation systems, manufacturing equipment and electrical distribution assemblies where a floor-standing enclosure is required but available installation depth is limited.

Its 400 mm depth can help reduce the enclosure footprint compared with deeper VX25 configurations, while the 1800 mm height provides vertical mounting space for control and electrical components. It may be installed as a standalone cabinet with the appropriate side panels or integrated into a bayed VX25 enclosure system.

Compatible VX25 Accessory Categories

Common accessory categories for VX 8884000 include:

• Screw-fastened side panels for 1800 mm high, 400 mm deep VX enclosures
• Internal baying brackets and blocks, plus external baying connectors
• Punched sections and rails for interior installation
• Cable-entry sections, cable-entry plates and cable-management components
• VX base/plinth corner pieces and trim panels
• Comfort handles, door accessories and hinge solutions
• LED system lights, earthing components and transportation accessories

Accessory compatibility depends on enclosure dimensions, installation position and project configuration. Confirm the required article numbers before placing an order.

View All VX25 Accessories and System Components 

Approvals

Confirm the current certificate edition, language and project acceptance requirements before procurement. Documentation availability may vary by market and document type.

Downloads

FAQ

Q1: Is VX 8884000 suitable for installations with limited cabinet depth?
A: The 400 mm depth can be useful where installation depth is limited. Before selection, check the depth of mounted components, terminals, cable ducts, connectors and required cable-bending space to ensure the planned internal layout will fit.

Q2: What should I check before choosing VX 8884000 instead of a deeper VX25 enclosure?
A: Consider component depth, rear wiring clearance, cable routing, connector access and climate-control requirements. A shallower enclosure can reduce the installation footprint, but applications with deeper equipment or extensive cabling may require a deeper VX25 model.

Q3: Can VX 8884000 be used as a standalone cabinet?
A: Yes. For standalone installation, the enclosure must be completed with the appropriate side panels and any other components required for the application. Sealing, cable entry, grounding and the required protection level should also be confirmed before installation.

Q4: How should I select accessories for VX 8884000?

A: Select accessories according to the enclosure dimensions, installation position and intended function. Side panels and other size-dependent components must match the enclosure dimensions, while mounting, baying, cable-entry and door accessories should be verified by article number before ordering.