VX 8886000 Bayed Enclosure System 800×1800×600 mm

VX 8886000 is a single-door VX25 bayed enclosure measuring 800 × 1800 × 600 mm. The sheet-steel enclosure includes a mounting plate, rear panel, roof plate and divided gland plates. Its 600 mm depth provides increased installation space for electrical components, cable routing and internal mounting compared with shallower VX25 configurations.

 

The VX25 modular frame supports flexible internal installation and side-by-side baying with compatible system components. We support single-unit and bulk procurement of VX 8886000, including model verification, accessory matching, consolidated quotations, technical documentation and international delivery coordination.

VX 8886000 Technical Specifications

Scope of Supply

• Enclosure frame
• One front door, hinged on the right and reversible to the left
• Roof plate
• Rear panel
• Divided gland plates
• Mounting plate
• Two punched rails, 18 x 39 mm
• Lock with 3 mm double-bit insert

VX25 System Features

• 25 mm frame pattern: The symmetrical frame provides two mounting levels accessible from inside and outside for flexible interior installation.
• All-side baying: The enclosure can be combined with other VX25 enclosures using the appropriate baying components.
• Depth-adjustable mounting plate: The mounting plate can be positioned on a 25 mm pitch pattern.
• Door access: The standard opening angle is 130 degrees, and the hinge side can be changed from right to left. A 180-degree opening is possible with the appropriate hinge solution.
• Load capacity: The enclosure system is specified for a load capacity of up to 15,000 N when installed in accordance with the applicable instructions.
• Potential equalization: The rear panel, roof and gland plates are conductively connected to the frame and prepared for additional earthing straps.

Applications

VX 8886000 may be used for industrial automation, machine control, manufacturing equipment and electrical distribution installations that require additional internal depth without moving to a taller VX25 enclosure configuration.

The 600 mm depth provides increased clearance for deeper electrical components, cable ducts, terminals and internal wiring compared with 400 mm or 500 mm deep models. Its 1800 mm height may also suit installations where vertical clearance is more limited than with 2000 mm or 2200 mm VX25 enclosures.

The enclosure may be configured as a standalone cabinet with the appropriate side panels or integrated into a multi-enclosure VX25 baying system.

Compatible VX25 Accessory Categories

Common accessory categories for VX 8886000 include:

• Screw-fastened side panels for 1800 mm high, 600 mm deep VX enclosures
• Internal baying brackets and blocks, plus external baying connectors
• Punched sections and rails for interior installation
• Cable-entry sections, cable-entry plates and cable-management components
• VX base/plinth corner pieces and trim panels
• Comfort handles, door accessories and hinge solutions
• LED system lights, earthing components and transportation accessories

Accessory compatibility depends on enclosure dimensions, installation position and project configuration. Confirm the required article numbers before placing an order.

View All VX25 Accessories and System Components 

Approvals

Confirm the current certificate edition, language and project acceptance requirements before procurement. Documentation availability may vary by market and document type.

Downloads

FAQ

Q1: When should I choose the 600 mm depth instead of a 400 mm or 500 mm VX25 enclosure?

A: A 600 mm deep enclosure may be more appropriate when the internal layout includes deeper components, larger cable ducts, substantial rear wiring or greater cable-bending requirements. The additional depth can provide more installation flexibility, but the available floor space and service clearance should also be considered before selection.

Q2: Does choosing a deeper enclosure automatically solve internal space problems?

A: Not necessarily. Available depth is only one part of the enclosure layout. Component positions, mounting plate arrangement, terminal locations, cable-entry direction, cable ducts and maintenance access should be planned together. In some applications, changing the internal layout may be more important than simply increasing enclosure depth.

Q3: Can VX 8886000 be used as a standalone enclosure?

A: Yes. Appropriate side panels and any other configuration-specific components must be added for standalone installation. The completed enclosure should be checked for sealing, grounding, cable entry and the required protection level.

Q4: Can VX 8886000 be added to an existing VX25 enclosure lineup?

A: VX25 supports bayed configurations, but compatibility should be checked against the existing installation. Confirm adjacent enclosure dimensions, baying hardware, base/plinth arrangement, cable routing and sealing requirements before adding another cabinet.