VX 8885000 Bayed Enclosure System 800×1800×500 mm

VX 8885000 is a single-door VX25 bayed enclosure measuring 800 × 1800 × 500 mm. The sheet-steel enclosure includes a mounting plate, rear panel, roof plate and divided gland plates. Its 500 mm depth provides additional installation clearance compared with shallower VX25 configurations while retaining a relatively compact 1800 mm enclosure height.

 

The VX25 modular frame supports flexible internal installation and side-by-side baying with compatible system components. We support single-unit and bulk procurement of VX 8885000, including model verification, accessory matching, consolidated quotations, technical documentation and international delivery coordination.

VX 8885000 Technical Specifications

Scope of Supply

• Enclosure frame
• One front door, hinged on the right and reversible to the left
• Roof plate
• Rear panel
• Divided gland plates
• Mounting plate
• Two punched rails, 18 x 39 mm
• Lock with 3 mm double-bit insert

VX25 System Features

• 25 mm frame pattern: The symmetrical frame provides two mounting levels accessible from inside and outside for flexible interior installation.
• All-side baying: The enclosure can be combined with other VX25 enclosures using the appropriate baying components.
• Depth-adjustable mounting plate: The mounting plate can be positioned on a 25 mm pitch pattern.
• Door access: The standard opening angle is 130 degrees, and the hinge side can be changed from right to left. A 180-degree opening is possible with the appropriate hinge solution.
• Load capacity: The enclosure system is specified for a load capacity of up to 15,000 N when installed in accordance with the applicable instructions.
• Potential equalization: The rear panel, roof and gland plates are conductively connected to the frame and prepared for additional earthing straps.

Applications

VX 8885000 may be used for machine controls, industrial automation systems, manufacturing equipment and electrical distribution assemblies requiring a floor-standing enclosure with moderate installation depth.

The 500 mm depth provides more internal clearance for components, terminals and cable routing than shallower VX25 configurations while avoiding the footprint of significantly deeper enclosures. The 1800 mm height may also suit installations where vertical clearance is more limited than with 2000 mm or 2200 mm VX25 models.

It may be configured as a standalone enclosure with the appropriate side panels or integrated into a multi-enclosure VX25 baying system.

Compatible VX25 Accessory Categories

Common accessory categories for VX 8885000 include:

• Screw-fastened side panels for 1800 mm high, 500 mm deep VX enclosures
• Internal baying brackets and blocks, plus external baying connectors
• Punched sections and rails for interior installation
• Cable-entry sections, cable-entry plates and cable-management components
• VX base/plinth corner pieces and trim panels
• Comfort handles, door accessories and hinge solutions
• LED system lights, earthing components and transportation accessories

Accessory compatibility depends on enclosure dimensions, installation position and project configuration. Confirm the required article numbers before placing an order.

View All VX25 Accessories and System Components 

Approvals

Confirm the current certificate edition, language and project acceptance requirements before procurement. Documentation availability may vary by market and document type.

Downloads

FAQ

Q1: Is 500 mm depth enough for a typical control cabinet installation?
A: It depends on the installed equipment and wiring layout. The 500 mm depth can accommodate many control and automation configurations, but component depth alone should not determine the selection. Allow space for terminals, cable ducts, connectors, cable-bending radii and access for installation and maintenance.

Q2: Should I choose VX 8885000 or the shallower VX 8884000?
A: The choice should be based primarily on the required internal installation depth rather than external footprint alone. VX 8884000 can be useful where cabinet depth is tightly constrained, while VX 8885000 provides an additional 100 mm of depth for equipment clearance and cable routing. Check the complete internal layout before deciding.

Q3: Can VX 8885000 be used as a standalone enclosure?
A: Yes. For standalone installation, appropriate side panels and any other configuration-specific components must be added. The completed enclosure should be checked for sealing, cable entry, grounding and the required protection level.

Q4: Can VX 8885000 be incorporated into an existing VX25 bayed system?
A: The VX25 platform is designed for bayed installations. Before adding VX 8885000 to an existing lineup, check the adjacent enclosure dimensions, baying hardware, base/plinth arrangement, cable routing and sealing requirements. Sharing the VX25 platform alone does not mean every configuration can be combined without additional planning.