Rittal AX 1095000 Carbon Steel Enclosure

The Rittal AX 1095000 is a wide, low-height double-door carbon steel wall-mounted enclosure for layouts that need a long mounting surface plus additional component depth. Its 800 × 400 × 300 mm body provides a 750 × 375 mm mounting area and added front-to-back clearance for projected components, wiring terminations and cable bends. IP55 protection and IK10 impact resistance suit protected industrial locations.

 

Need pricing or availability? Contact SUWI Auto with your required quantity and delivery destination for model verification and quotation support.

 

Article no.:	AX 1095000
Dimensions	Width: 800 mm Height: 400 mm Depth: 300 mm ( Width: 31.5 ˝ Height: 15.7 ˝ Depth: 11.8 ˝ )
Benefits	More interior finishing options thanks to integrated housing cams in the 25 mm system grid in combination with the rail for interior finishing and our wide range of system accessories Maintaining the protection class (UL approval) by mounting the rail for interior installation without drilling Additional mounting level and increased load capacity due to base configuration rail Easy planning and configuration with the Rittal configurator RiPanel
Material	Housing: Carbon steel Door: Carbon steel, all-round foamed-in PU seal
Surface finish	Housing and door: Dipcoat primed, powder-coated on the outside, textured paint Mounting panel: Zinc-plated
Color	RAL 7035
Supply includes	Housing with door(s) Flange (gland) plate(s) in enclosure base Mounting panel Punched door strip Lock: 3 mm double-bit
Protection category IP to EN 60 529	IP 55
Type rating according to UL 50E	Type 1 Type 12
IK code	IK10
Material thickness - door	2 mm ( 0.08 ˝ )
Material thickness - enclosure	1.5 mm ( 0.06 ˝ )
Material thickness – mounting plate	2 mm ( 0.08 ˝ )
Dimensions of mounting plate (W x H)	750 mm x 375 mm ( 29.5 ˝ x 14.8 ˝ )
Number of doors	2
No. of locks	2
Lock	Lock version: Cam No. of locks: 2 Lock Insert: 3 mm double-bit
Gland plate	Size: 5 Qty.: 2
Base material	Carbon steel
Packaging unit	1 pc(s).
Net weight	24.577 kg
Gross weight	24.889 kg
Customs tariff number	94032080
EAN	4028177995246
ETIM 9	EC000261
ETIM 8	EC000261
ECLASS 8.0	27180101

When 250 mm Depth Is Not Enough for a Wide, Low Layout

AX 1095000 keeps the 750 × 375 mm mounting panel used by the shallower AX 1094000 but increases enclosure depth to 300 mm. The selection therefore depends on the complete front-to-back stack: component body, terminals, connector projection, wire bend and any equipment mounted on the inside of the doors.

Choose AX 1094000 when the same horizontal panel area will fit within 250 mm depth and minimizing wall projection is more important. Choose AX 1055000 when 300 mm depth is required together with a taller 750 × 575 mm mounting panel. Before machining AX 1095000, verify installed depth at the terminals, preserve access to wiring-duct covers, allocate cut-outs to the correct door leaf, and divide incoming cables between the two size 5 base-entry zones.

Standard Delivery for AX 1095000

Use this supply list to separate the included enclosure components from optional interior-installation and cable-entry parts:

• Enclosure with two doors
• Mounting panel
• Two gland plates
• Punched door strip
• Two 3 mm double-bit cam locks

The standard configuration includes a 750 × 375 mm mounting panel and two size 5 gland plates in the enclosure base. Define cable quantity, outside diameter and connector dimensions for each entry zone before selecting alternative plates.

Approvals

Downloads

Recommended Accessories for AX 1095000

AX 1095000 uses interior rails specified for 300 mm enclosure depth and replacement entry plates matching gland-plate size 5. The enclosure has two base plates, so the required replacement quantity depends on whether the cable-entry design uses one side or both sides of the base.

Installation & Interior Mounting

2394300 Rail for Interior Installation AX

Suitable for enclosure type: AX

Suitable for depth: 300 mm

Packaging unit: 4 pc(s).

2394100 Base configuration rail

Suitable for enclosure type: AX

Packaging unit: 1 pc(s)

Cable Entry

2565300 Plastic Cable Gland Plate with Diaphragms

Size: 5

Width: 301 mm

Depth: 221 mm

Wall & External Mounting

2503020 Wall Mounting Bracket

Material: Carbon steel, zinc-plated Wall distance: 40 mm Suitable for enclosure type: AX / KX / AX wall-mounted housing, 3-part

Packaging unit: 4 pc(s)

Service & Documentation

4052000 Multitool

Packaging unit: 1 pc(s)

Plastic Wiring Plan Pocket

Packaging unit: 1 pc(s)

Grounding & Door Accessories

Ground Straps

Packaging unit: 8 pc(s)

2519020 Door stay

Packaging unit: 1 pc(s)

Need Another AX Enclosure Size?

AX 1095000 provides an 800 × 400 × 300 mm double-door enclosure with a 750 × 375 mm mounting panel. Compare AX 1094000 when the same panel area can use a 250 mm-deep body, or AX 1055000 when the same width and depth are needed with a 750 × 575 mm panel. Base the change on component projection, cable-bend space, vertical row count and available wall height.

View AX Carbon Steel Enclosures →