Rittal DK 7072100 PVC Edge Protection, 10 m

• Measure the panel thickness: Use the material thickness at the cut-out when checking the fit. The specified range is approximate, so confirm unusual edge finishes or modified panels before ordering.
• Check the profile space: Compare the 6 mm width and 11 mm height with the available clearance around the opening, nearby covers and the intended cable route.
• Measure the edge to be covered: Calculate the total length across all openings, including the cutting allowance needed for the project.
• Review cable movement: Check the finished opening and cable route together. Allow for the cable manufacturer's bend-radius requirements and confirm any separate cable support or sealing needs.

For an existing installation, send SUWI the panel thickness, opening dimensions and a close-up photo of the edge. For enclosure cut-out work, you can also submit your drawing through SUWI enclosure machining services.

Browse SUWI enclosure accessories for related cable routing and entry components.

FAQ

Q1: Can I select this edge protection by enclosure model alone?

A: Check the thickness of the material at the cut-out first. Rittal specifies approximately 1.0–2.0 mm for this article. Send the enclosure or panel details and a photo of the opening if you need the fit reviewed.

Q2: How do I calculate how much material to order?

A: Measure the edge length to be covered on each opening and add the totals for the project. Include an allowance for cutting and fitting. The supplied length is 10 m per piece; state the required number of pieces in your enquiry.

Q3: Can I use it where a sealed cable entry is required?

A: This product is specified for covering cut-out edges. Where the installation requires an IP-rated cable entry, confirm the sealing arrangement separately. Send the required protection rating and opening details so the appropriate entry components can be checked.

Q4: How do I request pricing and lead time?

A: Send DK 7072100, the required quantity, delivery destination and requested delivery date. For selection support, include the panel thickness, cut-out dimensions and photos or drawings of the intended application.