VX 8806000 Bayed Enclosure 800 × 2000 × 600 mm

VX 8806000 is a single-door VX25 bayed enclosure measuring 800 × 2000 × 600 mm. The 600 mm depth provides more front-to-back installation space than the 500 mm-deep VX 8805000 while retaining the same 800 mm width, 2000 mm height and 699 × 1896 mm mounting plate. This makes VX 8806000 suitable when deeper components, cable ducts, terminals or cable-bending radii require additional clearance without increasing the enclosure width.

The sheet-steel enclosure includes a mounting plate, rear panel, roof plate and divided gland plates. Its symmetrical 25 mm frame pattern supports flexible interior installation, while separately ordered side panels allow standalone use or baying with other VX25 enclosures.

VX 8806000 Technical Specifications

When the 600 mm Depth Matters

Choose VX 8806000 when a 500 mm-deep enclosure leaves insufficient clearance in front of the mounting plate or between installed components and the door. The additional depth can provide more room for deep control equipment, larger cable ducts, terminal arrangements and routing behind door-mounted equipment.

• Stay with VX 8805000 when the complete layout fits within 500 mm depth and a smaller floor footprint is more important.
• Select VX 8806000 when the design needs 100 mm more enclosure depth but does not need a wider mounting plate.
• Move to a wider or deeper VX25 model when the mounting plate is crowded, heat-producing components need greater separation, or the required cable-bending space still exceeds the available depth.

Scope of Supply

• Enclosure frame
• One front door, hinged on the right and reversible to the left
• Roof plate
• Rear panel
• Divided gland plates
• Mounting plate
• Two punched rails, 18 x 39 mm
• Lock with 3 mm double-bit insert

VX25 System Features

• 25 mm frame pattern: The symmetrical frame provides two mounting levels accessible from inside and outside for flexible interior installation.
• All-side baying: The enclosure can be combined with other VX25 enclosures using the appropriate baying components.
• Depth-adjustable mounting plate: The mounting plate can be positioned on a 25 mm pitch pattern.
• Door access: The standard opening angle is 130 degrees, and the hinge side can be changed from right to left. A 180-degree opening is possible with the appropriate hinge solution.
• Load capacity: The enclosure system is specified for a load capacity of up to 15,000 N when installed in accordance with the applicable instructions.
• Potential equalization: The rear panel, roof and gland plates are conductively connected to the frame and prepared for additional earthing straps.

Applications

VX 8806000 is suited to floor-standing machine-control, automation and electrical-distribution layouts that need an 800 mm-wide mounting area with more front-to-back clearance than a 500 mm-deep enclosure. Typical reasons for selecting this model include deeper drives or power components, larger cable ducts, increased terminal clearance and more space for routing conductors between the mounting plate and door area. It can be used as a standalone cabinet with matching side panels or as one section of a bayed VX25 suite.

Compatible VX25 Accessory Categories

Common accessory categories for VX 8806000 include:

• Screw-fastened side panels for 2000 mm high, 600 mm deep VX enclosures
• Internal baying brackets and blocks, plus external baying connectors
• Punched sections and rails for interior installation
• Cable-entry sections, cable-entry plates and cable-management components
• VX base/plinth corner pieces and trim panels
• Comfort handles, door accessories and 180-degree hinge solutions
• LED system lights, earthing components and transportation accessories

Accessory compatibility depends on enclosure dimensions, installation position and project configuration. Confirm the required article numbers before placing an order.

View All VX25 Accessories and System Components 

Approvals

Confirm the current certificate edition, language and project acceptance requirements before procurement. Documentation availability may vary by market and document type.

Downloads

FAQ

Q1: What are the dimensions of Rittal VX 8806000?

A: VX 8806000 measures 800 mm wide, 2000 mm high and 600 mm deep. It has one front door and a 699 x 1896 mm mounting plate.

Q2: Are side panels included with VX 8806000?

A: No. Side panels are ordered separately. They are required for the open sides when the enclosure is used as a standalone cabinet; bayed installations instead use the applicable connection and sealing components between enclosures.

Q3: What protection ratings apply to VX 8806000?

A: The model is specified as IP55 to IEC 60529 with side panels mounted, NEMA 1 and NEMA 12, Type 1 and Type 12 to UL 50E, and IK10 for impact protection. Final protection depends on correct assembly, cable entry, installed accessories and any enclosure modifications.

Q4: Can VX 8806000 be expanded into a multi-enclosure system?

A: Yes. VX25 enclosures are designed for baying on all sides. Use compatible internal or external baying components and confirm the sealing, grounding, base/plinth and cable-routing requirements for the complete enclosure suite.